8.5 KiB
plan2code-handoff
Turn everything useful in the current conversation into a single, self-contained handoff document that lets a different agent — a new session, a teammate's session, or a subagent — resume the work without re-reading this transcript.
The reader of this document starts with zero context. They can see the repo and can open files, but they cannot see this conversation. Write for them.
Interface
The FIRST thing you do, before anything else in this file — before inferring the next task: ask web console (browser page, suggested) or terminal? Console → run node "<D>/console.mjs" open --workflow handoff before reading (: references/web-console/ beside this SKILL.md — ~/.agents/skills/plan2code-handoff/references/web-console/ globally — or the dir in ~/.plan2code/console/console-dir), then read /console.md. The next-task confirmation and any clarifying questions go through it, and the finished handoff lands on the page as a doc with the download the page offers. Switchable anytime. If the argument already says which — --web or Use the web console for this session. — take it and do not ask; drop the flag. Launched by the dashboard? Its session is already open — resume it (console.md → Launches), then the one hard rule. On the console, a __stop action is the person ending the session (console.md → Stop requests); at every session end post finish BEFORE stop; unless it is a pause, the finish carries "dashboard": true (the Back to the dashboard button) and you keep waiting for the press (console.md → Finishing).
The one hard rule: capture the next task, and confirm it with the user
Every handoff MUST end with a Next task that the incoming agent should start on. This is the single most important part of the document — a handoff with a vague or missing next step forces the reader to re-derive intent, which is exactly what this skill exists to prevent.
Determine it like this:
- Try to infer it from the conversation — the open TODO, the failing test, the plan step you were mid-way through, the thing the user just asked for next. Look at what's actually unfinished, not just the last message.
- Present it to the user for confirmation before writing the file. If you
inferred a candidate, show it and ask them to confirm or correct it. If you
genuinely can't infer one, ask them to tell you what the next agent should do.
Use
AskUserQuestion(offer your inferred task as the recommended option) or a plain question — either is fine. - Do not write the document until the user has confirmed or supplied the next task. This gate is mandatory even when your inference feels obviously correct. The user's answer is the source of truth; your inference is only a draft of it.
If the user passed a focus area as an argument, treat it as a strong signal for the next task (and shape the whole document around it), but still confirm.
Where to write it
Ask the user if they would like to save the file to the temporary directory of the user's OS (this should be the default) or to some other location like ./handoffs/ at the repo root. Then let the script pick the exact path, from the project root:
node "<S>/handoff-path.mjs" --dir temp # or: --dir handoffs
<S> is scripts/ beside this SKILL.md (~/.agents/skills/plan2code-handoff/scripts/ globally). It prints one JSON object: path is <dir>/<YYYY-MM-DD-HHmm>-handoff.md from the clock (suffixed -2, -3... rather than overwrite an earlier handoff), and the folder is created if missing. Write the document to exactly that path. Exit 5 means the folder could not be created (or --dir names a file): ask for another location.
Make sure you aren't leaking the file into version control
The handoff is working state for the next session, not a project artifact, so it
should stay out of commits and PRs. Don't assume it will — this skill may run in
any repo. The same output's git block says:
repo: false, orinRepo: false(the OS temp dir): nothing to ignore; just tell the user where the file is.ignored: true: git already ignores it (via any.gitignore, global or nested;git check-ignoreis the check).ignored: false: it would be tracked;git.ignoreLineis the line to offer, and the top-levelwarningsays so.
If it is not ignored, do not silently modify the user's .gitignore. Tell
them the file would be tracked by git and offer to add the ignoreLine (e.g.
handoffs/) to .gitignore — let them decide. Some users may want handoffs committed so
teammates get them; that's a legitimate choice, so present it, don't force it.
If this touched a plan2code spec
specs/ is gitignored — Glob/Grep and file search silently skip it. If the
conversation worked inside specs/<feature>/, confirm the exact state before
writing with node "<S>/specs.mjs" status specs/<feature>, which reads the disk:
- Which
phase-X.mdis in progress, and which of its tasks are still open (each phase'stasksandopenTasks: checkboxes are ground truth, not the overview's Phase Checklist; a disagreement shows up inchecks). - Cite that file and its checkbox state directly in Current state and Key files & pointers, instead of relying on conversation memory alone.
- Let Suggested skills name the specific next pipeline command
(
/plan2code-3-implement --webto keep implementing the phase,/plan2code-4-finalize --webonce all phases are checked) — but only as a suggestion; the confirmed Next task above still governs what the reader does first.
No specs/ activity this session? Skip this section entirely.
What to include
Keep it tight and high-signal. Prefer pointers over prose: this repo already records a lot (plan specs, the loop's NDJSON logs, git history, diffs), so reference those by path or URL instead of copying them in. The reader can open a file; they can't open your memory.
Use this structure:
# Handoff — <short title of the work>
<!-- written <timestamp> -->
## Next task
<the confirmed next task — concrete and actionable, e.g.
"Implement Step 3 of specs/<name>.md: wire the aggregator into cli.ts, then
run `npm run build` in plan2code-metrics/ and fix the two failing tests.">
## Goal / why
<1–3 sentences: what the user is ultimately trying to achieve, so the reader
can make good judgment calls the instructions don't cover.>
## Current state
<Where things stand right now. What's done, what's in progress, what's broken.
Name the branch. Point at the plan/spec file(s) by path rather than restating
them. Note anything half-applied or left uncommitted.>
## Key files & pointers
<Bulleted paths the reader will need, each with a one-line "why". Include plan
specs, the files you were editing, relevant logs (e.g. .plan2code-loop NDJSON),
and any PR/issue URLs.>
## Gotchas & decisions
<Non-obvious things learned this session: a constraint (e.g. the 20,000-char limit
on src/plan2code-*.md), a decision made and why, a dead end already ruled out,
a command that must be run a specific way. Save the reader from re-discovering
these the hard way.>
## Suggested skills
<Which skills the next agent should use, and when — e.g. /plan2code-3-implement --web
to continue a phase, /plan2code-review before finishing, /plan2code-4-finalize --web
to wrap up. Skip if none apply.>
## Verification
<How the reader confirms their work: exact test/build commands, what "done"
looks like.>
Adapt the sections to the work — drop any that would be empty rather than padding them. Next task is the only section that is never optional.
Strip sensitive data
Before writing, remove credentials, API tokens, passwords, and personal identifiers. If a secret is load-bearing for the next step, reference where it lives (env var name, secret manager entry) rather than its value.
After writing
Tell the user the path you wrote to and give a one-line summary of the confirmed next task, so they know what the incoming agent will start on. Mention that a fresh session can be pointed at the file to resume the work.
If your ignore check above found the file is in a repo and not gitignored
(git.ignored: false, which includes a repo with no .gitignore), say so plainly
here, e.g. "note: handoffs/ isn't gitignored in this repo, so this file will
show up in git status and could be committed", and offer to add the
ignoreLine. Outside a repo there is nothing to ignore. Never leave
the user unaware that the handoff might ride along into a commit.